多体动力学程序切断铰的处理方法

多体系统动力学从非树系统派生出树系统的计算需要进行切断铰的处理。切断铰约束方程的形成是进行多体系统程序编写时的重要部分,其处理过程复杂,需要一定的技巧。本文引入了约束正交补轴的概念,详细介绍了几种典型(旋转铰、万向节、棱柱铰、旋转棱柱组合铰)切断铰位移约束方程、速度约束方程、加速度约束方程的形成方法,并给出了详细的程序化过程,该方法适用于任何类型的切断铰。最后给出相应算例,结果表明本文的方法能快速、正确地形成切断铰约束方程。     

基于三维接触有限元分析的管片等效抗弯刚度和错台研究

针对盾构隧道管片接头等效抗弯刚度预测研究中，对梁-弹簧与三维模型整体等效性考虑的不充分，以三维接触有限元计算结果作为测量信息，借助基于挠度等效的反问题求解，提出了一种确定管片接头等效抗弯刚度的新方法；并利用不同轴力-偏心距组合下的反演结果，建立了基于Kriging代理模型的轴力-弯矩-等效抗弯刚度的非线性关系，提出了由此关联的管片结构非线性问题的数值求解方法。与三维有限元结果相比，所提方法可较为准确地预测管片结构的内力和变形，表现出良好的整体等效性。此外，借助三维接触有限元分析，进一步深入探讨了螺栓孔间隙与衬垫本构关系对管片纵向错台量的影响。     

托卡马克真空室内线圈水冷管道接头强化二次流的数值研究

基于计算流体力学(CFD)理论，研究了不同曲率半径的螺旋导流片的托卡马克真空室内线圈水冷管道接头。利用湍流数值模拟方法，分析了线圈管道接头导流片曲率半径比、冷却水入口流速对线圈管道内流体平均雷诺数分布的影响。结果表明，不同导流片曲率半径比的线圈管道内的流体雷诺数分布曲线相似，平均雷诺数随入口流速的增加而增大，管道接头出口雷诺数随导流片曲率半径比的增大而减小，导流片曲率半径比小的管接头更适用于线圈水冷曲线管的二次流强化。此外，还为导流片曲率半径比为0.2的管接头拟合了管接头出口雷诺数与入口流速的关系式，为进一步研究类似于托卡马克真空室内线圈管道的曲线管接头的二次流强化提供理论基础。     

Quantification of multiple compounds containing heterogeneous elements in the mixture by one‐dimensional nuclear magnetic resonance spectroscopy of different nuclei using a single universal concentration reference

One‐dimensional (1D) quantitative NMR (qNMR) is a useful tool for concentration determination due to its experimental simplicity and the direct proportionality of the integrated signal area to the number of nuclei spin. For complex mixtures, however, signal overlapping often in one‐dimensional quantitative ¹H NMR (1D ¹H qNMR) spectrum limits the accurate quantification of individual compound. Here, we introduced employing joint 1D qNMR methods of different nuclei, such as ¹H and ³¹P (or/and ¹⁹F), to quantify multiple compounds in a complex mixture using a single universal concentration reference. When the concentration ratio of several compounds containing different elements in a complex mixture is of interest, the result calculated from measured intensities from 1D qNMR of different nuclei is independent of the gravimetric error from the reference. In this case, the common reference also serves as a ‘quantitative bridge’ among these 1D qNMR of different nuclei. Quantitative analysis of choline, phosphocholine, and glycerophosphocholine mixture is given as an example using trimethylphosphine oxide ((CH₃)₃P(O)) as concentration reference. Compounds containing multiple elements, such as tetramethylammonium hexafluorophosphate (N⁺(CH₃)₄PF₆^?), are proposed as the common concentration reference for ¹H, ¹³C, ¹⁵N, ³¹P, and ¹⁹F qNMR for the quantitative analysis of complex mixture containing these different elements. We anticipate that the proposed joint 1D qNMR approach using a universal concentration reference will be a valuable alternative for simultaneous quantification of multiple compounds in a complex mixture due to its accuracy and single and simple sample preparation. Copyright © 2014 John Wiley & Sons, Ltd.     

Fatigue damage behavior of a surface-mount electronic package under different cyclic applied loads

This paper studies and compares the effects of pull-pull and 3-point bending cyclic loadings on the mechanical fa- tigue damage behaviors of a solder joint in a surface-mount electronic package. The comparisons are based on experimental investigations using scanning electron microscopy （SEM） in-situ technology and nonlinear finite element modeling, respec- tively. The compared results indicate that there are different threshold levels of plastic strain for the initial damage of solder joints under two cyclic applied loads; meanwhile, fatigue crack initiation occurs at different locations, and the accumulation of equivalent plastic strain determines the trend and direction of fatigue crack propagation. In addition, simulation results of the fatigue damage process of solder joints considering a constitutive model of damage initiation criteria for ductile materials and damage evolution based on accumulating inelastic hysteresis energy are identical to the experimental results. The actual fatigue life of the solder joint is almost the same and demonstrates that the FE modeling used in this study can provide an accurate prediction of solder joint fatigue failure.     

Effect of Al2O3 nanoparticles on the steel-glass/epoxy composite joint bonded by a two-component structural acrylic adhesive

This paper reports a study on the effect of Al₂O₃ nanoparticles on the adhesion strength of steel-glass/epoxy composite joints bonded by a two-component structural acrylic adhesive. The addition of Al₂O₃ nanoparticles to the two-component acrylic adhesive led to a remarkable enhancement in the shear and tensile strength of the composite joints. The shear and tensile strength of the adhesive joints increased by addition of Al₂O₃ up to 1.5 wt%, which decreased by further addition of the nanofiller. Introduction of the nanoparticles caused a reduction in the peel strength of the joints. DSC analysis revealed that the glass transition temperature (Tg) of the adhesives rose by increasing the nanofiller content. The advancing water contact angle was decreased for adhesives containing nanoparticles. SEM micrographs indicated good dispersions of the Al₂O₃ nanoparticles within the acrylic matrix in the specimens with up to 1.5 wt% Al₂O₃ and revealed that addition of nanoparticles altered the fracture morphology from smooth to rough fracture surfaces.     

Perfect controlled joint remote state preparation independent of entanglement degree of the quantum channel

We construct a quantum circuit to produce a task-oriented partially entangled state and use it as the quantum channel for controlled joint remote state preparation. Unlike most previous works, where the parameters of the quantum channel are given to the receiver who can accomplish the task only probabilistically by consuming auxiliary resource, operation and measurement, here we give them to the supervisor. Thanks to the knowledge of the task-oriented quantum channel parameters, the supervisor can carry out proper complete projective measurement, which, combined with the feed-forward technique adapted by the preparers, not only much economizes (simplifies) the receiver's resource (operation) but also yields unit total success probability. Notably, such apparent perfection does not depend on the entanglement degree of the shared quantum channel. Our protocol is within the reach of current quantum technologies.     

平面滑移铰内发生自激振动的充分条件

自激振动是含摩擦机械系统最严重也最具破坏性的运动形式. 目前, 通常以增加润滑的方式 尽可能减少自激振动. 本文以平面滑移铰为研究对象, 假设铰连接的物体为刚体, 并且认为 铰内的间隙为小量, 推导了平面滑移铰内产生不符合物理事实解的条件. 这可看作是导致系 统产生自激振动的一种诱因. 该条件适用于任何含平面滑移铰的机械系统.